Šifra proizvoda: #24576

TEMP CTRL STC3008-12

Dual Digital STC-3008 Temperature Controller, Two Relay Output, with Probe, 12V

STC-3008 is a versatile temperature controller that features a dual-display thermostat with dual temperature measurement and a 10a relay Output (No, Common). The NTC temperature sensor has a range of -50 °c to 110°c and operates on a 12v DC supply. The temperature controller has the characteristics of high precision, high sensitivity, and high stability. Supports temperature correction and supports energy loss with control temperature by setting the temperature setting value and the difference value. It also features with alarm when the temperature exceeds the temperature limit or when a sensor error occurs.

STC-3008 is designed with a high-performance and durable housing with easy-to-install panel mounting. Can be directly mounted in industrial panel cutouts. This controller switches the relay on and off based on a temperature set point. The relay can be used to control loads like heaters, coolers, pumps, etc. The set points can be programmed onboard using the display and keypad. Multiple modes can be used, like turning on the relay after setpoint, below setpoint, between specific temperature ranges, delay, etc.

Optional Voltage Range: 12V DC
Temperature measuring range: -55-120 Celsius
Resolution: 0.1°C
Screen Display: Dual Screen Dual Display
Machine Power Consumption: Less Than 3w
Temperature Measurement Accuracy: ±1°C (-50°C č 70°C)
Sensor error delay: 1 minute
Sensors: NTC Sensor
Probe cable length: 1m
Probe Size: φ4mm*20mm
Relay contact capacity: Cool (10A/220VAC); Heat (10A/220VAC)